Marathon 0.75 HP Jet Pump Motor, 3 phase, 3600 RPM, 200-230/460 V, 56J Frame, TEFC - K1232

Catalog #:K1232
Part #:5K36MN4135
  • Nameplated 60/50 hertz at next lowest horsepower
  • Will accept C-Face Kits as noted, also see Accessories section
  • Severe duty kits available, see Accessories section
  • Shaft slinger, Regreasable bearings (182T and larger), lead lugs (364T and larger), and bearing caps on 444T and larger
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
You have no products selected for comparison. Please select at least two products to compare using the 'Add to Compare' checkbox found on product list pages or product detail pages.
Sorry, this item is no longer available.
Available warehouses not found.
Weight:16.00 LB

General Specifications

Weight: 16.00 LB Packaged Length: 15.44 IN
Packaged Width: 10.19 IN Packaged Height: 9.5 IN

Nameplate Specifications

Output HP: 0.75 Hp Output KW: 0.56 kW
Frequency: 60 Hz Voltage: 200-230/460 V
Current: 2.6-2.6,1.3 A Speed: 3450 rpm
Service Factor: 1.5 Phase: 3
Efficiency: 74.2 % Power Factor: 0
Duty: Continous Insulation Class: B
KVA Code: M Frame: 56J
Enclosure: Totally Enclosed Fan Cooled Thermal Protection: N/R
Ambient Temperature: 40 °C Drive End Bearing Size: 6203
Opp Drive End Bearing Size: 6203 UL: Recognized
CSA: Yes CE: N

Technical Specifications

Electrical Type: Three Phase Starting Method: N/R
Poles: 2 Rotation: Counterclockwise/Clockwise
Mounting: Round Motor Orientation: Any
Drive End Bearing: BALL Opp Drive End Bearing: BALL
Frame Material: Rolled Steel Overall Length: 11.9 in
Frame Length: 6.22 in Shaft Diameter: 0.630 in
Shaft Extension: 2.39 in
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.
The following items have been added to your cart: {0}