Marathon 30 HP Fire Pump Motor, 3 phase, 3600 RPM, 190/380-400 V, 284TS Frame, ODP - U596

Catalog #:U596
Part #:284TSTDBD4007
  • Designed for use on pumps for fire pump duty
  • UL file EX5190, CSA file LR2025 and CE mark
  • 50°C ambient
  • Red paint on 25 HP through 200 HP
  • NEMA Design B, Code G or less
  • Will accept C-Face kits, see Accessories section for kits
  • Single voltage motors have 12 leads and are suitable for wye-delta, across the line, or part winding start
  • Dual voltage motors have 12 leads, suitable for wye-delta or across the line start on either voltage, or part winding start on low voltage
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
You have no products selected for comparison. Please select at least two products to compare using the 'Add to Compare' checkbox found on product list pages or product detail pages.
Sorry, this item is no longer available.
Discontinued
Available warehouses not found.
Weight:374 LB
List Price: $3,727.00

General Specifications

UPC: 722856067364 Weight: 374 LB
Packaged Length: 28.74 IN Packaged Width: 25.39 IN
Packaged Height: 25 IN

Nameplate Specifications

Output HP: 30 Hp Output KW: 22.4 kW
Frequency: 60 Hz Voltage: 190/380-400 V
Current: 87.0/43.5-41.0 A Speed: 3560 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 91 % Power Factor: 86
Duty: Continuous Insulation Class: F
Design Code: B KVA Code: F
Frame: 284TS Enclosure: Drip Proof
Thermal Protection: No Ambient Temperature: 50 °C
Drive End Bearing Size: 6211 Opp Drive End Bearing Size: 6211
UL: Listed CSA: Y
CE: Y IP Code: 23

Technical Specifications

Electrical Type: Squirrel Cage Induction Run Starting Method: Part Wdg Start & Wye Start Delta Run
Poles: 2 Rotation: Reversible
Resistance Main: .38 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Rolled Steel
Shaft Type: TS Overall Length: 24.34 in
Frame Length: 12.59 in Shaft Diameter: 1.625 in
Shaft Extension: 3.25 in Assembly/Box Mounting: F1/F2 CAPABLE

Speed Characteristics

Curvepoint Current (Amps) Current (%) Torque (ft-lbs) (%) Speed (RPM) Rated Output (KW) Power Factor (%) Rated Output (Hp)
2/3 155.00 70.00 2,400 30.00
No Load 13.00 0.00 0.0 3,600 8.0 30.00
Pull-Up 180.00 52.00 1,800 30.00
Locked-Rotor 205.00 62.00 140.0 0 36.0 30.00
1/3 195.00 52.00 1,200 30.00
Full Load 36.00 100.0 44.50 100.0 3,560 86.0 30.00
Break-Down 125.00 110.00 250.0 3,350 72.0 30.00

Load Characteristics

% of Rated Load 0 % 25 % 50 % 75 % 100 % 115 % 125 %
Current (Amps) 14.95 17.83 24.15 32.20 41.40 47.15 51.18
Rated Output (KW) 1.50 6.60 12.50 18.50 24.50 28.50 31.00
Efficiency (%) 0.0 84.0 89.5 91.0 91.0 91.0 90.2
Power Factor (%) 8.0 54.0 74.0 82.0 86.0 87.0 87.0
Speed (RPM) 3,600 3,590 3,580 3,570 3,560 3,550 3,545
Temp. Rise @ FL 0.0 0.0 0.0 0.0 40.0 55.0 65.0
Torque (ft-lbs) 0.00 11.00 22.00 33.00 44.50 51.00 55.50
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.