Marathon 1.50 HP Power Tools Motor, 1 phase, 1800 RPM, 115/208-230 V, 56H Frame, TEFC - T018

Catalog #:T018
Part #:056B17F5328
  • Capacitor start/capacitor run design for reduced amperage
  • Double sealed ball bearings
  • Heavy gauge steel frame and base
  • Manual reset thermal protector
  • Dependable, dust-proof centrifugal starting switch
  • On/off toggle switch and 8 foot cord with 115 volt plug included on 1/2 to 1-1/2 HP models
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
Sorry, this item is no longer available.
Available warehouses not found.
Weight:45.00 LB
List Price: $984.00

General Specifications

UPC: 722856043665 Weight: 45.00 LB
Packaged Length: 15.82 IN Packaged Width: 12.56 IN
Packaged Height: 9.38 IN

Nameplate Specifications

Output HP: 1.50 Hp Output KW: 1.1 kW
Frequency: 60 Hz Voltage: 115/208-230 V
Current: 13.6/7.5-6.8 A Speed: 1725 rpm
Service Factor: 1.15 Phase: 1
Efficiency: 81.5 % Power Factor: 87
Duty: Continuous Insulation Class: B
Design Code: L KVA Code: K
Frame: 56H Enclosure: Totally Enclosed Fan Cooled
Thermal Protection: Manual Ambient Temperature: 40 °C
Drive End Bearing Size: 6205 Opp Drive End Bearing Size: 6205
UL: Recognized ( Not Protector) CSA: Y
CE: N IP Code: 43

Technical Specifications

Electrical Type: Capacitor Start Capacitor Run Starting Method: Across The Line
Poles: 4 Rotation: Selective Counterclockwise
Mounting: Rigid Base Motor Orientation: Horizontal
Drive End Bearing: Ball Opp Drive End Bearing: Ball
Frame Material: Rolled Steel Shaft Type: Single Special Extension
Overall Length: 13.73 in Shaft Diameter: 0.625 in
Shaft Extension: 1.88 in Assembly/Box Mounting: F3
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.