Marathon 60 HP Definite Purpose AC Motor, 3 phase, 1800 RPM, 230/460 V, 364TS Frame, TEFC - E802

Catalog #:E802
Part #:364TSTFS4026
  • Suitable for use on a VFD. Variable Torque and Constant Torque (as noted)
  • 1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power
  • F1 conduit box on Rigid Base, F3 on C-Face Footed (Rigid Base) motors
  • Bearing Current Protection (BCP), as noted
  • Shaft slinger, Class F insulation, 1.15 Service Factor, Ball bearings (except as noted
  • C-Face Footed models are rated 60/50 Hz, same HP
  • Motors accept C-face kits, as noted
  • UL Recognized, CSA Certified and CE Mark
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
Sorry, this item is no longer available.
Discontinued
Available warehouses not found.
Sorry, this item is no longer available.

General Specifications

Weight: 942.00 LB Packaged Length: 37.88 IN
Packaged Width: 31.88 IN Packaged Height: 26.92 IN

Nameplate Specifications

Output HP: 60 Hp Output KW: 45 kW
Frequency: 60 Hz Voltage: 230/460 V
Current: 144/72 A Speed: 1775 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 93.6 % Power Factor: 83
Duty: CONTINUOUS Insulation Class: F
Design Code: B KVA Code: G
Frame: 364TS Enclosure: TEFC
Thermal Protection: NOT Ambient Temperature: 40 °C
Drive End Bearing Size: 6312 Opp Drive End Bearing Size: 6312
UL: Recognized CSA: Y
CE: Y IP Code: 43

Technical Specifications

Electrical Type: SQ CAGE IND RUN Starting Method: ACROSS THE LINE
Poles: 4 Rotation: REV
Resistance Main: 0.1 Ohms Mounting: RIGID
Motor Orientation: HORIZONTAL Drive End Bearing: BALL
Opp Drive End Bearing: BALL Frame Material: CAST IRON
Shaft Type: TS Overall Length: 29.38 in
Frame Length: 13.5 in Shaft Diameter: 1.88 in
Shaft Extension: 3.99 in Assembly/Box Mounting: F1/F2 CAPABLE

Speed Characteristics

Curvepoint Current (Amps) Current (%) Torque (ft-lbs) (%) Speed (RPM) Rated Output (KW) Power Factor (%) Rated Output (Hp)
Pull-Up 350.00 486.0 350.00 198.0 900 60.00
Locked-Rotor 435.00 604.0 375.00 212.0 0 37.0 60.00
Full Load 72.00 100.0 177.00 100.0 1,775 60.00
No Load 26.00 36.0 0.00 0.0 1,800 60.00
Break-Down 250.00 347.0 475.00 268.0 1,715 60.00
2/3 300.00 417.0 400.00 226.0 1,200 60.00
1/3 400.00 556.0 325.00 184.0 600 60.00

Load Characteristics

% of Rated Load 0 % 25 % 50 % 75 % 100 % 115 % 125 %
Current (Amps) 26.00 31.00 42.00 56.00 72.00 83.00 89.00
Rated Output (KW) 1.50 12.50 24.00 35.50 47.50 54.50 60.00
Efficiency (%) 0.0 88.5 92.4 93.6 93.6 93.0 93.0
Power Factor (%) 6.0 50.0 72.0 80.0 83.0 84.0 84.5
Speed (RPM) 1,800 1,795 1,790 1,785 1,775 1,772 1,770
Temp. Rise @ FL 0.0 0.0 0.0 0.0 75.0 105.0 0.0
Torque (ft-lbs) 0.00 44.00 88.00 133.00 177.00 205.00 222.00
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.