Marathon 60 HP Definite Purpose AC Motor, 3 phase, 1800 RPM, 230/460 V, 364HPV Frame, ODP - M838

Catalog #:M838
Part #:364TTDR5039
  • Normal and Medium thrust
  • Ball bearings and angular contact bearings for medium thrust applications
  • Class B insulation
  • 1.15 Service Factor
  • Suitable for 230 volt part winding start through 100 HP (dual voltage motors)
  • Heavy duty lifting lugs
  • Drip cover/canopy cap included
  • UL Recognized and CSA Certified
  • UL Listed for Fire Pump applications (except as noted)
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
Sorry, this item is no longer available.
Discontinued
Available warehouses not found.
Sorry, this item is no longer available.

General Specifications

Packaged Length: 44.88 IN Packaged Width: 26 IN
Packaged Height: 22.18 IN

Nameplate Specifications

Output HP: 60 Hp Output KW: 45 kW
Frequency: 60 Hz Voltage: 230/460 V
Current: 154/77 A Speed: 1760 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 91.7 % Power Factor: 79.5
Duty: CONTINUOUS Insulation Class: B
Design Code: A KVA Code: F
Frame: 364HPV Enclosure: DP
Thermal Protection: NOT Ambient Temperature: 40 °C
Drive End Bearing Size: 6314 Opp Drive End Bearing Size: 6311
UL: Recognized CSA: Y
CE: Y IP Code: 22

Technical Specifications

Electrical Type: SQ CAGE IND RUN Starting Method: ACROSS THE LINE
Poles: 4 Rotation: REV
Resistance Main: 0.122 Ohms Mounting: ROUND
Motor Orientation: SHAFT DOWN Drive End Bearing: BALL
Opp Drive End Bearing: BALL Frame Material: ROLLED STEEL
Shaft Type: HP Overall Length: 31.19 in
Frame Length: 14.5 in Shaft Diameter: 1.63 in
Shaft Extension: 4.5 in Assembly/Box Mounting: F1/F2 CAPABLE

Speed Characteristics

Curvepoint Current (Amps) Current (%) Torque (ft-lbs) (%) Speed (RPM) Rated Output (KW) Power Factor (%) Rated Output (Hp)
Full Load 77.00 100.0 179.00 100.0 1,760 60.00
1/3 375.00 487.0 250.00 140.0 500 60.00
2/3 325.00 422.0 325.00 182.0 1,000 60.00
No Load 33.00 43.0 0.00 0.0 1,800 60.00
Break-Down 260.00 338.0 435.00 243.0 1,675 60.00
Locked-Rotor 400.00 519.0 300.00 168.0 0 36.0 60.00
Pull-Up 350.00 455.0 275.00 154.0 750 60.00

Load Characteristics

% of Rated Load 0 % 25 % 50 % 75 % 100 % 115 % 125 %
Current (Amps) 33.00 37.50 47.00 61.00 77.00 85.00 92.50
Rated Output (KW) 1.00 12.50 24.00 36.00 48.50 56.00 61.00
Efficiency (%) 0.0 86.5 91.0 91.7 91.7 91.7 91.0
Power Factor (%) 6.0 43.5 65.5 75.5 79.5 82.0 83.0
Speed (RPM) 1,800 1,790 1,780 1,770 1,760 1,755 1,750
Temp. Rise @ FL 0.0 0.0 0.0 0.0 65.0 85.0 0.0
Torque (ft-lbs) 0.00 44.00 88.50 133.00 179.00 207.00 225.00
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.