Marathon 5 HP Definite Purpose AC Motor, 3 phase, 1800 RPM, 208-230/460 V, 184TC Frame, TEFC - N1616

Catalog #:N1616
Part #:184TTWW4026
  • 10:1 Variable torque, Constant torque speed range as listed below
  • MAX GUARD® Class F insulation system
  • 1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power
  • Double sealed ball bearings
  • 303 Stainless steel shaft with spring loaded contact seals in each endshield (Drive end only on TENV motors)
  • Stainless steel conduit box cover, nameplate, fan guard (TEFC only) and hardware
  • Cast oversized conduit box with high temperature nitrile gaskets and threaded entrance
  • Plugged drain holes in each endshield for all angle mounting
  • Internal corrosion resistant coatings on frame, base, endshields, rotor and stator
  • USDA-approved, white epoxy RUST-OLEUM® paint,UL Recognized, CSA Certified and CE Mark
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
Sorry, this item is no longer available.
Discontinued
Available warehouses not found.
Sorry, this item is no longer available.

General Specifications

Weight: 66.00 LB Packaged Length: 18.31 IN
Packaged Width: 13.5 IN Packaged Height: 13.44 IN

Nameplate Specifications

Output HP: 5 Hp Output KW: 3.70 kW
Frequency: 60 Hz Voltage: 208-230/460 V
Current: 14-13/6.5 A Speed: 1750 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 87.5 % Power Factor: 82.3
Duty: CONTINUOUS Insulation Class: F
Design Code: B KVA Code: J
Frame: 184TC Enclosure: TEFC
Thermal Protection: NOT Ambient Temperature: 40 °C
Drive End Bearing Size: 6207 Opp Drive End Bearing Size: 6205
UL: Recognized CSA: Y
CE: Y IP Code: 55

Technical Specifications

Electrical Type: SQ CAGE IND RUN Starting Method: ACROSS THE LINE
Poles: 4 Rotation: REV
Resistance Main: 3.08 Ohms Mounting: RIGID
Motor Orientation: HORIZONTAL Drive End Bearing: BALL
Opp Drive End Bearing: BALL Frame Material: ROLLED STEEL
Shaft Type: T Overall Length: 14.47 in
Frame Length: 9 in Shaft Diameter: 1.13 in
Shaft Extension: 2.75 in Assembly/Box Mounting: F1 ONLY

Speed Characteristics

Curvepoint Current (Amps) Current (%) Torque (ft-lbs) (%) Speed (RPM) Rated Output (KW) Power Factor (%) Rated Output (Hp)
Pull-Up 0.00 0.0 28.00 187.0 250 0.00 0.0 5.00
Locked-Rotor 46.00 708.0 29.20 195.0 0 0.00 0.0 5.00
Full Load 6.50 100.0 15.00 100.0 1,760 0.00 82.1 5.00
Break-Down 29.50 454.0 48.60 324.0 1,485 0.00 0.0 5.00

Load Characteristics

% of Rated Load 0 % 25 % 50 % 75 % 100 % 115 % 125 % 150 %
Current (Amps) 2.80 3.18 4.03 5.17 6.50 7.40 8.03 9.77
Rated Output (KW) 0.15 1.13 2.13 3.16 4.25 4.89 5.41 6.65
Efficiency (%) 0.0 82.4 87.7 88.6 87.5 87.7 86.1 84.2
Power Factor (%) 6.9 44.6 66.2 76.7 82.1 82.9 84.6 85.4
Speed (RPM) 1,798 1,790 1,778 1,766 1,760 1,754 1,737 1,719
Temp. Rise @ FL 0.0 0.0 0.0 0.0 70.0 90.0 115.0 0.0
Torque (ft-lbs) 0.00 3.66 7.38 11.16 15.00 17.22 18.89 22.92
Catalog #:N616B
Part #:184TTWW6026
List Price: $2,391.00
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.