Marathon 2 HP Definite Purpose AC Motor, 3 phase, 1200 RPM, 230/460 V, 184T Frame, ODP - E1730

Catalog #:E1730
Part #:184TTDW4076
  • Meets or exceeds NEMA Premium® efficiencies NEMA Premium® models are in compliance with EISA2007
  • Motors are suitable for 10:1 VT on all frame sizes and 10:1 CT up to 365T frame (Except where noted)
  • 1.15 Service Factor
  • Normally closed thermostats, as noted
  • Class F Insulation
  • Nameplated 60/50 hertz
  • UL Recognized, CSA Certified and CE Marked
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
You have no products selected for comparison. Please select at least two products to compare using the 'Add to Compare' checkbox found on product list pages or product detail pages.
Sorry, this item is no longer available.
Available warehouses not found.
Sorry, this item is no longer available.

General Specifications

Weight: 65.00 LB Packaged Length: 18.31 IN
Packaged Width: 13.5 IN Packaged Height: 13.44 IN

Nameplate Specifications

Output HP: 2 Hp Output KW: 1.49 kW
Frequency: 60/50 Hz Voltage: 230/460 V
Current: 6.8/3.4 A Speed: 1170 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 85.5 % Power Factor: 64.4
Duty: CONTINUOUS Insulation Class: F
Design Code: B KVA Code: J
Frame: 184T Enclosure: DP
Thermal Protection: NOT Ambient Temperature: 40 °C
Drive End Bearing Size: 6206 Opp Drive End Bearing Size: 6205
UL: Recognized CSA: Y
CE: Y IP Code: 22

Technical Specifications

Electrical Type: SQ CAGE IND RUN Starting Method: ACROSS THE LINE
Poles: 6 Rotation: REV
Resistance Main: 6.6 Ohms Mounting: RIGID
Motor Orientation: HORIZONTAL Drive End Bearing: BALL
Opp Drive End Bearing: BALL Frame Material: ROLLED STEEL
Shaft Type: T Overall Length: 13.19 in
Frame Length: 9 in Shaft Diameter: 1.13 in
Shaft Extension: 2.81 in Assembly/Box Mounting: F1 ONLY
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.
The following items have been added to your cart: {0}