Leeson 40 HP Elevator Duty Motor, 3 phase, 1800 RPM, 230/460 V, 324TC Frame, ODP - LM30763

Catalog #:LM30763
Part #:LM30763
  • Dual rated nameplates
  • Designed for belt driven pumps
  • Wye start/delta run
  • Class F Insulation
  • F-1 mounting
  • Ball bearings with grease fittings and automatic relief
  • Low noise and low vibration
  • UL recognized component listing and CSA approved
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
Sorry, this item is no longer available.
Discontinued
Available warehouses not found.
Discontinued

General Specifications

UPC: 691720093788 Weight: 480.00 LB
Packaged Length: 32 IN Packaged Width: 26.25 IN
Packaged Height: 21.95 IN

Nameplate Specifications

Output HP: 40 Hp Output KW: 30.0 kW
Frequency: 60 Hz Voltage: 230/460 V
Current: 100.0/50.0 A Speed: 1780 rpm
Service Factor: 1 Phase: 3
Efficiency: 93.6 % Power Factor: 80
Duty: 60 Minute Insulation Class: F
Design Code: A KVA Code: K
Frame: 324TC Enclosure: Drip Proof
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6311 Opp Drive End Bearing Size: 6309
UL: Recognized CSA: Y
CE: Y IP Code: 22

Technical Specifications

Electrical Type: Squirrel Cage Inverter Duty Starting Method: Wye Start Delta Run Or Inverter
Poles: 4 Rotation: Reversible
Resistance Main: .14 Ohms Mounting: Round
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Rolled Steel
Shaft Type: T Overall Length: 29.30 in
Frame Length: 15.63 in Shaft Diameter: 2.125 in
Shaft Extension: 5.3 in Assembly/Box Mounting: F1/F2 CAPABLE

Speed Characteristics

Curvepoint Current (Amps) Current (%) Torque (ft-lbs) (%) Speed (RPM) Rated Output (KW) Power Factor (%) Rated Output (Hp)
2/3 375.00 750.0 210.00 178.0 1,200 40.00
Full Load 50.00 100.0 118.00 100.0 1,780 40.00
Locked-Rotor 450.00 900.0 200.00 169.0 0 23.0 40.00
Break-Down 300.00 600.0 450.00 381.0 1,600 65.0 40.00
Pull-Up 400.00 800.0 180.00 153.0 900 40.00
1/3 425.00 850.0 170.00 144.0 600 40.00
No Load 24.00 48.0 0.00 0.0 1,800 40.00

Load Characteristics

% of Rated Load 0 % 25 % 50 % 75 % 100 % 115 % 125 % 150 % 200 %
Current (Amps) 24.00 27.50 32.50 40.50 50.00 55.50 59.50 0.00 0.00
Rated Output (KW) 1.00 8.50 16.00 24.00 32.00 36.50 40.00 0.00 0.00
Efficiency (%) 0.0 87.5 92.4 93.6 93.6 93.6 93.6 0.0 0.0
Power Factor (%) 5.0 39.0 62.0 74.0 80.0 82.5 84.0 0.0 0.0
Speed (RPM) 1,800 1,795 1,790 1,785 1,780 1,775 1,773 0 0
Temp. Rise @ FL 0.0 0.0 0.0 0.0 100.0 0.0 0.0 0.0 0.0
Torque (ft-lbs) 0.00 29.00 58.50 88.50 118.00 136.00 148.00 0.00 0.00
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.