Leeson 10 HP Air Compressor Motor, 3 phase, 1800 RPM, 230/460 V, 215T Frame, TEFC - 140451.00

Catalog #:140451.00
Part #:140451.00
  • Double shielded ball bearings
  • Designed for belted loads
  • High starting and breakdown torque
  • Meets or exceeds NEMA ® service factors
  • Dual rotation
  • Class F insulation system
  • Rolled Steel
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
You have no products selected for comparison. Please select at least two products to compare using the 'Add to Compare' checkbox found on product list pages or product detail pages.
Sorry, this item is no longer available.
Discontinued
Available warehouses not found.
Weight:161 LB
List Price: $1,893.00

General Specifications

UPC: 691720349519 Weight: 161 LB
Packaged Length: 22.63 IN Packaged Width: 16.13 IN
Packaged Height: 14.25 IN

Nameplate Specifications

Output HP: 10 Hp Output KW: 7.5 kW
Frequency: 60/50 Hz Voltage: 230/460 V
Current: 26.8/13.4 A Speed: 1765 rpm
Service Factor: 1.25 Phase: 3
Efficiency: 91.7 % Power Factor: 77
Duty: Continuous Insulation Class: F
Design Code: B KVA Code: H
Frame: 215T Enclosure: Totally Enclosed Fan Cooled
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6207 Opp Drive End Bearing Size: 6206
UL: Recognized CSA: Y
CE: Y IP Code: 54

Technical Specifications

Electrical Type: Squirrel Cage Induction Run Starting Method: Across The Line
Poles: 4 Rotation: Reversible
Resistance Main: .755 Ohms Mounting: Rigid base
Motor Orientation: HORIZONTAL Drive End Bearing: BALL
Opp Drive End Bearing: BALL Frame Material: Rolled Steel
Shaft Type: T Overall Length: 19.70 in
Frame Length: 13.00 in Shaft Diameter: 1.375 in
Shaft Extension: 3.38 in Assembly/Box Mounting: F1 ONLY

Speed Characteristics

Curvepoint Current (Amps) Current (%) Torque (ft-lbs) (%) Speed (RPM) Rated Output (KW) Power Factor (%) Rated Output (Hp)
Full Load 13.40 100.0 29.75 100.0 1,765 0.00 0.0 10.00
Locked-Rotor 79.00 590.0 55.20 186.0 0 0.00 0.0 10.00
Pull-Up 77.00 575.0 40.00 134.0 400 0.00 0.0 10.00
Break-Down 48.50 362.0 90.00 303.0 1,550 0.00 0.0 10.00

Load Characteristics

% of Rated Load 0 % 25 % 50 % 75 % 100 % 115 % 125 % 150 %
Current (Amps) 6.20 6.90 8.60 10.70 13.40 15.00 16.20 19.50
Rated Output (KW) 0.30 2.18 4.12 6.11 8.16 9.40 10.28 12.48
Efficiency (%) 0.0 85.8 90.6 91.7 91.7 91.0 90.7 89.6
Power Factor (%) 6.1 39.6 60.1 71.7 77.0 78.8 79.2 80.3
Speed (RPM) 1,799 1,793 1,784 1,774 1,765 1,758 1,754 1,743
Temp. Rise @ FL 0.0 0.0 0.0 0.0 55.0 70.0 85.0 0.0
Torque (ft-lbs) 0.00 7.33 14.71 22.23 29.75 34.20 37.43 45.17
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.