Leeson 5 HP Washdown Motor, 3 phase, 1800 RPM, 230/460 V, 184TC Frame, TEFC - 132448.00

Catalog #:132448.00
Part #:132448.00
  • All exterior components are 300-series stainless steel
  • All sealing components are Viton® for superior chemical resistance
  • Double lip shaft seals on both ends of TEFC motors (shaft end only on TENV motors)
  • Removable hydrophobic breathers in opposite shaft end bell and conduit box equalize pressure without allowing moisture to enter
  • Double-sealed bearings are pre-lubricated with moisture-resistant high-temperature grease for long life
  • Interior coatings applied to rotor and stator protect against corrosion
  • Windings are immersed and cured in polyester insulating varnish for extra moisture-resistance
  • Single and three phase motors are UL component recognized – file number E57948, guide number PRGY2; Full fact nameplate is laser etched on the motor frame
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
You have no products selected for comparison. Please select at least two products to compare using the 'Add to Compare' checkbox found on product list pages or product detail pages.
Sorry, this item is no longer available.
Discontinued
Available warehouses not found.
Weight:80 LB
List Price: $3,497.00

General Specifications

UPC: 691720053034 Weight: 80 LB
Packaged Length: 17.94 IN Packaged Width: 13.06 IN
Packaged Height: 12.88 IN

Nameplate Specifications

Output HP: 5 Hp Output KW: 3.7 kW
Frequency: 60/50 Hz Voltage: 230/460 V
Current: 12.6/6.3 A Speed: 1725 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 89.5 % Power Factor: 83.1
Duty: Continuous Insulation Class: F
Design Code: B KVA Code: J
Frame: 184TC Enclosure: Totally Enclosed Fan Cooled
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6207 Opp Drive End Bearing Size: 6207
UL: Recognized CSA: Y
CE: Y IP Code: 55

Technical Specifications

Electrical Type: Squirrel Cage Inverter Rated Starting Method: Line Or Inverter
Poles: 4 Rotation: Reversible
Resistance Main: 2.68 Ohms Mounting: Round
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Stainless Steel
Shaft Type: T Overall Length: 15.77 in
Frame Length: 10.00 in Shaft Diameter: 1.125 in
Shaft Extension: 2.75 in Assembly/Box Mounting: F1 Only

Speed Characteristics

Curvepoint Current (Amps) Current (%) Torque (ft-lbs) (%) Speed (RPM) Rated Output (KW) Power Factor (%) Rated Output (Hp)
Full Load 6.30 100.0 14.96 100.0 1,760 4.17 0.0 5.00
Locked-Rotor 49.00 778.0 30.10 201.0 0 0.00 0.0 5.00
Break-Down 0.00 0.0 50.20 336.0 0 0.00 0.0 5.00
Pull-Up 0.00 0.0 29.80 199.0 0 0.00 0.0 5.00

Load Characteristics

% of Rated Load 0 % 25 % 50 % 75 % 100 % 115 % 125 % 150 %
Current (Amps) 2.40 2.80 3.72 4.90 6.30 7.20 7.80 9.46
Rated Output (KW) 0.13 1.09 2.10 3.10 4.17 4.83 5.30 6.49
Efficiency (%) 0.0 85.9 88.9 90.2 89.5 89.3 88.0 86.2
Power Factor (%) 6.8 48.8 70.9 79.4 83.0 84.2 85.3 86.1
Speed (RPM) 1,798 1,790 1,779 1,768 1,760 1,747 1,742 1,727
Temp. Rise @ FL 0.0 0.0 0.0 0.0 65.0 0.0 0.0 0.0
Torque (ft-lbs) 0.00 3.68 7.39 11.13 14.96 17.38 18.84 22.80
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.