Marathon 7 HP Crop Dryer Motor, 1 phase, 3600 RPM, 230 V, 184TZ Frame, DPAO - Z306A

Catalog #:Z306A
Part #:184TCDW7617
  • Double sealed ball bearings
  • Continuous duty
  • Class F insulation
  • Thermostats for thermal overload protection (auto reset protector on Z304)
  • 34” long leads for ease of installation
  • Keyed shafts with 1/4”-20 UNC tapped hole in end
  • Capacitors included
  • Extra nameplate included, loose, for remote mounting
  • Capacitor start induction run design
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
You have no products selected for comparison. Please select at least two products to compare using the 'Add to Compare' checkbox found on product list pages or product detail pages.
Sorry, this item is no longer available.
Available warehouses not found.
Sorry, this item is no longer available.

General Specifications

UPC: 722856028457 Weight: 83 LB
Packaged Length: 17.94 IN Packaged Width: 13.06 IN
Packaged Height: 12.88 IN

Nameplate Specifications

Output HP: 7 Hp Output KW: 5.2 kW
Frequency: 60/60 Hz Voltage: 230 V
Current: 36.5 A Speed: 3505 rpm
Service Factor: 1.3 Phase: 1
Efficiency: 75.5 % Power Factor: 81.5
Duty: Continuous Insulation Class: F
Design Code: No Design Code KVA Code: F
Frame: 184TZ Enclosure: Drip Proof Air Over
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6206 Opp Drive End Bearing Size: 6205
UL: Recognized CSA: Y
CE: N IP Code: 22

Technical Specifications

Electrical Type: Capacitor Start Induction Run Starting Method: Across The Line
Poles: 2 Rotation: Selective Counterclockwise
Resistance Main: 0 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Rolled Steel
Shaft Type: Single Special Extension Overall Length: 14.88 in
Frame Length: 10.50 in Shaft Diameter: 1.125 in
Shaft Extension: 3 in Assembly/Box Mounting: F1 Only

Speed Characteristics

Curvepoint Current (Amps) Current (%) Torque (ft-lbs) (%) Speed (RPM) Rated Output (KW) Power Factor (%) Rated Output (Hp)
Full Load 46.00 100.0 13.60 100.0 3,475 0.00 0.0 9.00
Locked-Rotor 196.50 427.0 24.50 180.0 0 0.00 0.0 9.00
Break-Down 0.00 0.0 26.00 191.0 0 0.00 0.0 9.00
Pull-Up 0.00 0.0 19.60 144.0 0 0.00 0.0 9.00

Load Characteristics

% of Rated Load 100 % 130 %
Current (Amps) 36.50 46.00
Rated Output (KW) 6.85 9.10
Efficiency (%) 75.5 74.0
Power Factor (%) 81.5 85.5
Speed (RPM) 3,505 3,475
Temp. Rise @ FL 0.0 0.0
Torque (ft-lbs) 10.50 13.60
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.