Marathon 7.50 HP Crop Dryer Motor, 1 phase, 3600 RPM, 230 V, 184TZ Frame, DPAO - Z313

Catalog #:Z313
Part #:184TBDR7324
  • Double sealed ball bearings
  • Continuous duty
  • Class F insulation
  • Thermostats for thermal overload protection (auto reset protector on Z304)
  • 34” long leads for ease of installation
  • Keyed shafts with 1/4”-20 UNC tapped hole in end
  • Capacitors included
  • Extra nameplate included, loose, for remote mounting
  • Capacitor start/capacitor run design for reduced amperage
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
Sorry, this item is no longer available.
Discontinued
Available warehouses not found.
Weight:89.00 LB

General Specifications

UPC: 722856028488 Weight: 89.00 LB
Packaged Length: 22.5 IN Packaged Width: 16.81 IN
Packaged Height: 14.75 IN

Nameplate Specifications

Output HP: 7.50 Hp Output KW: 5.6 kW
Frequency: 60 Hz Voltage: 230 V
Current: 30.0 A Speed: 3525 rpm
Service Factor: 1.35 Phase: 1
Efficiency: 84 % Power Factor: 96.5
Duty: Continuous Insulation Class: F
Design Code: NO DESIGN CODE KVA Code: E
Frame: 184TZ Enclosure: Drip Proof Air Over
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6206 Opp Drive End Bearing Size: 6205
UL: Recognized CSA: Y
CE: N IP Code: 22

Technical Specifications

Electrical Type: Capacitor Start Capacitor Run Starting Method: Across The Line
Poles: 2 Rotation: Selective Counterclockwise
Resistance Main: .222 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Rolled Steel
Shaft Type: Single Special Extension Overall Length: 16.43 in
Frame Length: 8.75 in Shaft Diameter: 1.125 in
Shaft Extension: 3.5 in Assembly/Box Mounting: F3

Speed Characteristics

Curvepoint Current (Amps) Current (%) Torque (ft-lbs) (%) Speed (RPM) Rated Output (KW) Power Factor (%) Rated Output (Hp)
Break-Down 114.00 271.0 27.70 185.0 3,200 22.60 0.0 10.00
Pull-Up 192.00 457.0 20.30 135.0 825 33.20 0.0 10.00
No Load 5.10 12.0 0.00 0.0 3,600 0.67 57.0 10.00
Full Load 42.00 100.0 15.00 100.0 3,485 9.20 95.5 10.00
Locked-Rotor 205.00 488.0 20.50 137.0 0 34.20 0.0 10.00
Catalog #:131848.00
Part #:131848.00
List Price: $1,915.00
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.