Marathon .33 HP Auger Drive Motor, 1 phase, 1800 RPM, 115/230 V, 48NZ Frame, TEFC - F201

Catalog #:F201
Part #:048C17F2000
  • Class F insulation
  • 1.15 Service Factor (except as noted)
  • Ball bearings
  • 300% and greater starting torque for hard-to-start application
  • Totally enclosed and fully gasketed for dirty environments
  • 213/215TZ models have 1-1/8” shaft, 182TZ model has 7/8” shaft
  • Manual reset thermal protector
  • Condensate drains
  • Shaft slinger
  • UL Recognized and CSA Certified
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
Sorry, this item is no longer available.
Discontinued
Available warehouses not found.
Sorry, this item is no longer available.

General Specifications

Weight: 13.00 LB

Nameplate Specifications

Output HP: .33 Hp Output KW: 0.25 kW
Frequency: 60 Hz Voltage: 115/230 V
Current: 5/2.5 A Speed: 1725 rpm
Service Factor: 1 Phase: 1
Efficiency: 70 % Power Factor: 62
Duty: CONTINUOUS Insulation Class: F
Design Code: No Design Code KVA Code: K
Frame: 48NZ Enclosure: TEFC
Thermal Protection: MANUAL Ambient Temperature: 40 °C
Drive End Bearing Size: 6203 Opp Drive End Bearing Size: 6203
UL: Recognized CSA: Y
CE: Y IP Code: 43

Technical Specifications

Electrical Type: CAP START IND RUN Starting Method: ACROSS THE LINE
Poles: 4 Rotation: SELECTIVE CCW
Resistance Main: 0 Ohms Mounting: RESILIENT RINGS
Motor Orientation: HORIZONTAL Drive End Bearing: BALL
Opp Drive End Bearing: BALL Frame Material: ROLLED STEEL
Shaft Type: DBL SPL EXT Overall Length: 11.31 in
Frame Length: 6.5 in Shaft Diameter: .5 in
Shaft Extension: 1.54 in Assembly/Box Mounting: F1 Only

Speed Characteristics

Curvepoint Current (Amps) Current (%) Torque (ft-lbs) (%) Speed (RPM) Rated Output (KW) Power Factor (%) Rated Output (Hp)
Break-Down 6.30 252.0 39.50 247.0 1,536 1.20 0.0 0.33
Pull-Up 8.80 352.0 29.00 181.0 1,200 1.40 0.0 0.33
Locked-Rotor 12.40 496.0 48.30 302.0 0 2.60 0.0 0.33
Full Load 2.50 100.0 16.00 100.0 1,745 0.35 0.0 0.33

Load Characteristics

% of Rated Load 0 % 25 % 50 % 75 % 100 % 115 % 125 % 135 % 150 % 175 % 200 %
Current (Amps) 1.68 1.75 1.90 2.11 2.50 2.58 2.74 2.90 3.16 3.71 4.47
Rated Output (KW) 0.07 0.13 0.20 0.28 0.36 0.41 0.44 0.48 0.54 0.66 0.81
Efficiency (%) 0.0 47.4 61.7 68.1 70.0 70.7 70.3 68.0 67.0 66.4 61.5
Power Factor (%) 17.9 33.3 46.2 56.9 62.0 68.3 70.3 72.0 74.4 77.2 78.7
Speed (RPM) 1,800 1,787 1,776 1,764 1,752 1,744 1,736 1,720 1,719 1,694 1,658
Temp. Rise @ FL 0.0 0.0 0.0 0.0 45.0 50.0 0.0 90.0 0.0 0.0 0.0
Torque (ft-lbs) 0.00 4.00 7.90 12.00 16.00 18.50 20.20 21.65 24.50 29.10 33.80
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.