Marathon 1/2 HP Condenser Fans HVAC/R Motor, 3 phase, 1200 RPM, 575 V, 56Z Frame, ODP - K1500

Catalog #:K1500
Part #:5K49MN6432S
  • 65°C ambient
  • Enclosed shaft end bracket, vented frame
  • Automatic reset thermal protector
  • Nameplate 60/50 hertz 190/380 volts, at next lower HP
  • Double sealed ball bearings
  • 5/8” Dia. x 5” long shaft with flat and keyway
  • Threaded lead exit
  • Shaft ext 6" L by 5/8" diametet with full flat and key 90° apart
  • 4 Locating screws 90 degrees apart, 3.33” from outer edge of shaft slinger
  • Hubs on both ends will accept resilient base kits, see Accessories section
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
Sorry, this item is no longer available.
Available warehouses not found.
Weight:27.00 LB
List Price: $820.00

General Specifications

UPC: 722856038333 Weight: 27.00 LB
Packaged Length: 17.69 IN Packaged Width: 7.69 IN
Packaged Height: 7.5 IN

Nameplate Specifications

Output HP: 1/2 Hp Output KW: 0.37 kW
Frequency: 60 Hz Voltage: 575 V
Current: 1 A Speed: 1140 rpm
Service Factor: 1 Phase: 3
Efficiency: 68 % Power Factor: 0
Duty: Continuous Insulation Class: B
Design Code: B KVA Code: L
Frame: 56Z Enclosure: Drip Proof
Thermal Protection: AUTO Ambient Temperature: 65 °C
Drive End Bearing Size: 6203 Opp Drive End Bearing Size: 6203
UL: Recognized CSA: Yes

Technical Specifications

Electrical Type: Three Phase Starting Method: N/R
Poles: 6 Rotation: Counterclockwise/Clockwise
Mounting: Round Motor Orientation: VSU
Drive End Bearing: BALL Opp Drive End Bearing: BALL
Frame Material: Rolled Steel Overall Length: 15.49 in
Frame Length: 7.15 in Shaft Diameter: 0.63 in
Shaft Extension: 6 in Thru-bolts Extension: 0 in
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.