Marathon 2 HP General Purpose Motor, 3 phase, 1800 RPM, 575 V, 145T Frame, TENV - E302A

Catalog #:E302A
Part #:145TTTN16037
  • 10:1 Variable torque, Constant torque speed range as listed below
  • MAX GUARD® Class F insulation system
  • 1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power
  • Double sealed ball bearings. Totally enclosed, non-ventilated
  • 303 Stainless steel shaft with spring loaded contact seals in each endshield (Drive end only on TENV motors)
  • Stainless steel conduit box cover, nameplate, fan guard (TEFC) and hardware
  • Cast oversized conduit box with high temperature nitrile gaskets and threaded entrance
  • Plugged drain holes in each endshield for all angle mounting
  • Internal corrosion resistant coatings on frame, base, endshields, rotor and stator
  • USDA-approved, white epoxy RUST-OLEUM® paint
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
Sorry, this item is no longer available.
Discontinued
Available warehouses not found.
Weight:66.00 LB
List Price: $857.00

General Specifications

UPC: 722856051059 Weight: 66.00 LB
Packaged Length: 15.5 IN Packaged Width: 14 IN
Packaged Height: 9.38 IN

Nameplate Specifications

Output HP: 2 Hp Output KW: 1.5 kW
Frequency: 60 Hz Voltage: 575 V
Current: 2.4 A Speed: 1760 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 86.5 % Power Factor: 71
Duty: Continuous Insulation Class: F
Design Code: B KVA Code: N
Frame: 145T Enclosure: Totally Enclosed Non Ventilated
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6205 Opp Drive End Bearing Size: 6203
UL: Recognized CSA: Y
CE: Y IP Code: 43

Technical Specifications

Electrical Type: Squirrel Cage Induction Run Starting Method: Across The Line
Poles: 4 Rotation: Reversible
Resistance Main: 6.58 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Cast Iron
Shaft Type: T Overall Length: 12.68 in
Frame Length: 7.50 in Shaft Diameter: 0.875 in
Shaft Extension: 2.56 in Assembly/Box Mounting: F2/F1 Capable

Speed Characteristics

Curvepoint Current (Amps) Current (%) Torque (ft-lbs) (%) Speed (RPM) Rated Output (KW) Power Factor (%) Rated Output (Hp)
Locked-Rotor 30.50 1,017.0 24.50 408.0 0 0.00 71.0 2.00
1/3 29.00 967.0 20.80 347.0 600 0.00 0.0 2.00
No Load 1.90 63.0 0.00 0.0 1,800 0.00 0.0 2.00
Pull-Up 29.50 983.0 23.70 395.0 115 0.00 0.0 2.00
2/3 24.40 813.0 25.70 428.0 1,200 0.00 0.0 2.00
Break-Down 19.50 650.0 33.20 553.0 1,200 0.00 87.5 2.00
Full Load 3.00 100.0 6.00 100.0 1,760 0.00 0.0 2.00

Load Characteristics

% of Rated Load 0 % 25 % 50 % 75 % 100 % 115 % 125 %
Current (Amps) 1.52 1.60 1.84 2.08 2.40 2.72 2.80
Rated Output (KW) 0.11 0.50 0.88 1.28 1.70 2.00 2.15
Efficiency (%) 0.0 77.0 85.5 86.5 86.5 85.7 87.5
Power Factor (%) 7.0 30.0 49.0 62.0 71.0 76.0 77.0
Speed (RPM) 1,800 1,790 1,780 1,770 1,760 1,755 1,750
Temp. Rise @ FL 0.0 0.0 0.0 0.0 90.0 0.0 0.0
Torque (ft-lbs) 0.00 1.50 3.00 4.45 6.00 6.90 7.50
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.