Marathon 2 HP General Purpose Motor, 3 phase, 3600 RPM, 208-230/460 V, 56C Frame, ODP - G227

Catalog #:G227
Part #:056T34D5330
  • Ball bearings, mechanically locked on shaft end
  • Rated 60/50 hertz, 190/380 or 380 volt, at next lower horsepower (as noted)
  • 1.15 Service Factor (except as noted)
  • Rolled steel 56-145T frame motors accept brake kits, see Accessories section
  • UL Recognized and CSA Certified
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
Sorry, this item is no longer available.
Discontinued
Available warehouses not found.
Sorry, this item is no longer available.

General Specifications

Weight: 24.00 LB Packaged Length: 13.25 IN
Packaged Width: 8 IN Packaged Height: 7.75 IN

Nameplate Specifications

Output HP: 2 Hp Output KW: 1.5 kW
Frequency: 60 Hz Voltage: 208-230/460 V
Current: 6.4-6.2/3.1 A Speed: 3450 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 80 % Power Factor: 78.2
Duty: Continuous Insulation Class: B
Design Code: B KVA Code: J
Frame: 56C Enclosure: Drip Proof
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6203 Opp Drive End Bearing Size: 6203
UL: Recognized CSA: Y
CE: Y IP Code: 22

Technical Specifications

Electrical Type: Squirrel Cage Induction Run Starting Method: Across The Line
Poles: 2 Rotation: Reversible
Mounting: Round Motor Orientation: Horizontal
Drive End Bearing: Ball Opp Drive End Bearing: Ball
Frame Material: Rolled Steel Shaft Type: T
Overall Length: 10.44 in Frame Length: 6.56 in
Shaft Diameter: 0.625 in Shaft Extension: 2.06 in
Assembly/Box Mounting: F1 Only
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.