Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-HMQ852-5-H1-210-47
Image differs from product
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Input Bore (C Face):||1.375||Output shaft:||Hollow Bore|
|Output Hollow Shaft Diameter (in):||2.938 in||Series Style:||NH-HMQ-H1|
|Input Keyway (C Face):||5/16 x 5/32||Housing material:||Cast Iron|
|Output RPM:||350||Center distance (inch):||5.25|
|Frame Size:||210||Shaft Seal Material:||Viton|
|No. of Gear Reductions:||Single||Output Torque:||5753|
|Input RPM:||1,750||Reducer:||Worm - Right Angle|
|Model Code:||HMQ852||Output Shaft Assembly Code:||H1|
|Bore Code:||47||Product Type:||Right Angle|
|Input Style:||C-face Quill||Output HP:||31.17|
|Input Diameter (in):||1.375 in||Input HP:||32.51|
|Mounting Style:||Shaft Mount||Output Key:||3/4 X 4|
|Ratio Range:||5:1||Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers|
|Reducer Style:||Worm - Right Angle||Gear Drive Reductions:||Single|
|Output Shaft Orientation:||H1||Output Style:||H1|
|Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Ratio:||5:1|
|Overhung Load:||3,100||Service Factor:||1|