Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-BMQ852-15-L-250
Image differs from product
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Ratio:||15:1||Output Diameter (in):||2.000 in|
|No. of Gear Reductions:||Single||Input Keyway (C Face):||3/8 x 3/16|
|Output Shaft Orientation:||L||Output RPM:||116|
|Input Style:||C-face Quill||Housing material:||Cast Iron|
|Service Factor:||1||Overhung Load:||3,560|
|Mounting Style:||Base||Center distance (inch):||5.25|
|Gear Drive Reductions:||Single||Output HP:||16.55|
|Shaft Seal Material:||Viton||Product Type:||Right Angle|
|Input RPM:||1,750||Series Style:||NH-BMQ-L|
|Input HP:||18.11||Output Style:||L|
|Reducer:||Worm - Right Angle||Frame Size:||250|
|Reducer Style:||Worm - Right Angle||Output Key:||1/2 x 2.50|
|Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Input Diameter (in):||1.625 in|
|Output shaft:||Shaft||Model Code:||BMQ852|
|Output Shaft Assembly Code:||L||Gear Type:||Worm|
|Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Output Torque:||8941|
|Input Bore (C Face):||1.625|