Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-BMQ852-100-L-180
Image differs from product
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Gear Type:||Worm||Output Torque:||4646|
|Output Style:||L||Output Shaft Orientation:||L|
|Housing material:||Cast Iron||Output Shaft Assembly Code:||L|
|No. of Gear Reductions:||Single||Service Factor:||1|
|Reducer:||Worm - Right Angle||Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers|
|Gear Drive Reductions:||Single||Output RPM:||17|
|Reducer Style:||Worm - Right Angle||Assembly:||BMQ-L|
|Input Keyway (C Face):||1/4 x 1/8||Output Diameter (in):||2.000 in|
|Overhung Load:||3,600||Output shaft:||Shaft|
|Series Style:||NH-BMQ-L||Center distance (inch):||5.25|
|Product Type:||Right Angle||Shaft Seal Material:||Viton|
|Input Bore (C Face):||1.125||Model Code:||BMQ852|
|Ratio Range:||100:1 to 250:1||Frame Size:||180|
|Output HP:||1.291||Output Key:||1/2 x 2.50|
|Input Style:||C-face Quill||Ratio:||100:1|
|Mounting Style:||Base||Input RPM:||1,750|
|Input HP:||2.072||Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers|
|Input Diameter (in):||1.125 in|