Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-HMQ842-40-H1-210-35
Image differs from product
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Product Type:||Right Angle||Input Keyway (C Face):||5/16 x 5/32|
|Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Gear Type:||Worm|
|Center distance (inch):||4.25||Output RPM:||43|
|Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Output Key:||1/2 X 3.38|
|Input Diameter (in):||1.375 in||Assembly:||HMQ-H1|
|No. of Gear Reductions:||Single||Frame Size:||210|
|Shaft Seal Material:||Viton||Reducer Style:||Worm - Right Angle|
|Overhung Load:||3,715||Input Style:||C-face Quill|
|Housing material:||Cast Iron||Output Torque:||6156|
|Output HP:||4.274||Bore Code:||35|
|Output Hollow Shaft Diameter (in):||2.188 in||Input Bore (C Face):||1.375|
|Output Shaft Assembly Code:||H1||Output Shaft Orientation:||H1|
|Service Factor:||1||Ratio Range:||40:1|
|Input HP:||5.262||Model Code:||HMQ842|
|Input RPM:||1,750||Reducer:||Worm - Right Angle|
|Mounting Style:||Shaft Mount||Output Style:||H1|
|Output shaft:||Hollow Bore||Gear Drive Reductions:||Single|