Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-HMQ842-20-H1-180-35
Image differs from product
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Output RPM:||87||Overhung Load:||3,320|
|Output Torque:||6092||Frame Size:||180|
|Gear Drive Reductions:||Single||Output Style:||H1|
|Output Shaft Assembly Code:||H1||Gear Type:||Worm|
|Reducer Style:||Worm - Right Angle||Input Style:||C-face Quill|
|Input RPM:||1,750||Product Type:||Right Angle|
|Mounting Style:||Shaft Mount||Input Bore (C Face):||1.125|
|Ratio:||20:1||Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers|
|Shaft Seal Material:||Viton||Center distance (inch):||4.25|
|Ratio Range:||20:1||Output Hollow Shaft Diameter (in):||2.188 in|
|Input Diameter (in):||1.125 in||Housing material:||Cast Iron|
|Model Code:||HMQ842||Input Keyway (C Face):||1/4 x 1/8|
|Assembly:||HMQ-H1||Output shaft:||Hollow Bore|
|Service Factor:||1||Reducer:||Worm - Right Angle|
|Output Key:||1/2 X 3.38||Series Style:||NH-HMQ-H1|
|Bore Code:||35||Input HP:||9.462|
|Output Shaft Orientation:||H1||No. of Gear Reductions:||Single|
|Output HP:||8.458||Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers|