Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-HM842-60-H1-210-31
Image differs from product
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Reducer Style:||Worm - Right Angle||Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers|
|Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Product Type:||Right Angle|
|Series Style:||NH-HM-H1||Model Code:||HM842|
|Gear Type:||Worm||Center distance (inch):||4.25|
|Reducer:||Worm - Right Angle||Ratio:||60:1|
|Gear Drive Reductions:||Single||Assembly:||HM-H1|
|Ratio Range:||60:1||Output shaft:||Hollow Bore|
|Bore Code:||31||Output Shaft Assembly Code:||H1|
|Output HP:||2.772||Input Style:||C-Face Coupled|
|Output Style:||H1||Output Shaft Orientation:||H1|
|Output Hollow Shaft Diameter (in):||1.938 in||Output Key:||1/2 X 3.38|
|Output RPM:||29||No. of Gear Reductions:||Single|
|Input RPM:||1,750||Input Keyway (C Face):||5/16 x 5/32|
|Frame Size:||210||Housing material:||Cast Iron|
|Input HP:||3.681||Input Bore (C Face):||1.375|
|Input Diameter (in):||1.375 in||Output Torque:||5989|
|Shaft Seal Material:||Viton||Service Factor:||1|
|Mounting Style:||Shaft Mount|