Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-BM842-15-D-210
Image differs from product
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Ratio Range:||15:1||Mounting Style:||Base|
|No. of Gear Reductions:||Single||Input HP:||11.13|
|Output Shaft Orientation:||D||Output Diameter (in):||1.750 in|
|Input Style:||C-Face Coupled||Reducer:||Worm - Right Angle|
|Input RPM:||1,750||Output Key:||3/8 x 2.25|
|Output RPM:||116||Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers|
|Output Torque:||5508||Output Style:||D|
|Overhung Load:||3,190||Gear Type:||Worm|
|Reducer Style:||Worm - Right Angle||Input Diameter (in):||1.375 in|
|Model Code:||BM842||Output Shaft Assembly Code:||D|
|Output HP:||10.2||Input Bore (C Face):||1.375|
|Gear Drive Reductions:||Single||Shaft Seal Material:||Viton|
|Frame Size:||210||Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers|
|Housing material:||Cast Iron||Service Factor:||1|
|Output shaft:||Shaft||Product Type:||Right Angle|
|Input Keyway (C Face):||5/16 x 5/32||Center distance (inch):||4.25|