Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-BM842-25-L-210
Image differs from product
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Input Diameter (in):||1.375 in||Input Bore (C Face):||1.375|
|Ratio:||25:1||Housing material:||Cast Iron|
|Output shaft:||Shaft||Input HP:||7.94|
|Reducer Style:||Worm - Right Angle||Overhung Load:||3,445|
|Frame Size:||210||Product Type:||Right Angle|
|Series Style:||NH-BM-L||Output Key:||3/8 x 2.25|
|Center distance (inch):||4.25||Assembly:||BM-L|
|No. of Gear Reductions:||Single||Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers|
|Service Factor:||1||Input Style:||C-Face Coupled|
|Output Diameter (in):||1.750 in||Shaft Seal Material:||Viton|
|Output RPM:||70||Input RPM:||1,750|
|Ratio Range:||25:1||Mounting Style:||Base|
|Output Shaft Assembly Code:||L||Output Torque:||6254|
|Reducer:||Worm - Right Angle||Gear Type:||Worm|
|Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Input Keyway (C Face):||5/16 x 5/32|
|Output HP:||6.946||Output Shaft Orientation:||L|
|Output Style:||L||Model Code:||BM842|
|Gear Drive Reductions:||Single|