Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-BM842-5-L-210

Catalog #:NH-BM842-5-L-210
Part #:NH8420145.00
  • Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
  • Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
  • Large oil capacity provides positive splash lubrication and superior cooling capability.
  • Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
  • O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
  • Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
  • The unique quill seal guard protects the input seal from damage during motor installation.
  • Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
  • All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
  • Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
You have no products selected for comparison. Please select at least two products to compare using the 'Add to Compare' checkbox found on product list pages or product detail pages.
Sorry, this item is no longer available.
Available warehouses not found.
Weight:131.00 LB
List Price: $2,700.00

General Specifications

UPC: 69031007961 Weight: 131.00 LB

Technical Specifications

Reducer: Worm - Right Angle Series Style: NH-BM-L
Output RPM: 350 Output Diameter (in): 1.750 in
Model Code: BM842 Output Style: L
Output Shaft Assembly Code: L Gear Type: Worm
Reducer Style: Worm - Right Angle Output shaft: Shaft
Mounting Style: Base Product Type: Right Angle
Series: NH Series - Ironman Narrow Housing Worm Gear Reducers Gear Drive Reductions: Single
Input Bore (C Face): 1.375 Service Factor: 1
Center distance (inch): 4.25 Ratio Range: 5:1
Input HP: 18.08 Assembly: BM-L
Frame Size: 210 Input Diameter (in): 1.375 in
Shaft Seal Material: Viton No. of Gear Reductions: Single
Housing material: Cast Iron Output Shaft Orientation: L
Product Line: NH Series - Ironman Narrow Housing Worm Gear Reducers Input Style: C-Face Coupled
Output Key: 3/8 x 2.25 Input RPM: 1,750
Output HP: 17.25 Overhung Load: 2,800
Input Keyway (C Face): 5/16 x 5/32 Output Torque: 3209
Ratio: 5:1
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.