Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-HMQ832-5-H1-210-31
Image differs from product
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Output Shaft Orientation:||H1||Input Style:||C-face Quill|
|Product Type:||Right Angle||Input RPM:||1,750|
|Output Style:||H1||Input HP:||11.92|
|Gear Type:||Worm||Output Shaft Assembly Code:||H1|
|Gear Drive Reductions:||Single||Shaft Seal Material:||Viton|
|Model Code:||HMQ832||Frame Size:||210|
|Center distance (inch):||3.25||Bore Code:||31|
|Overhung Load:||2,275||Output HP:||11.29|
|Output Key:||1/2 X 3.38||Ratio:||5:1|
|Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Ratio Range:||5:1|
|Output Torque:||2033||Reducer:||Worm - Right Angle|
|Housing material:||Cast Iron||No. of Gear Reductions:||Single|
|Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Series Style:||NH-HMQ-H1|
|Input Bore (C Face):||1.375||Output shaft:||Hollow Bore|
|Reducer Style:||Worm - Right Angle||Output Hollow Shaft Diameter (in):||1.938 in|
|Service Factor:||1||Input Diameter (in):||1.375 in|
|Input Keyway (C Face):||5/16 x 5/32||Mounting Style:||Shaft Mount|