Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-HM832-25-H1-210-31
Image differs from product
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Shaft Seal Material:||Viton||Input RPM:||1,750|
|Housing material:||Cast Iron||Bore Code:||31|
|Input Diameter (in):||1.375 in||Service Factor:||1|
|Frame Size:||210||Output Hollow Shaft Diameter (in):||1.938 in|
|Model Code:||HM832||Center distance (inch):||3.25|
|Input Keyway (C Face):||5/16 x 5/32||Output Key:||1/2 X 3.38|
|Input Style:||C-Face Coupled||Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers|
|Input HP:||4.373||Gear Type:||Worm|
|Output Style:||H1||Input Bore (C Face):||1.375|
|Output Shaft Orientation:||H1||No. of Gear Reductions:||Single|
|Gear Drive Reductions:||Single||Output HP:||3.732|
|Output RPM:||70||Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers|
|Output Shaft Assembly Code:||H1||Reducer:||Worm - Right Angle|
|Reducer Style:||Worm - Right Angle||Output shaft:||Hollow Bore|
|Mounting Style:||Shaft Mount||Ratio Range:||25:1|
|Product Type:||Right Angle||Overhung Load:||2,275|