Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-HM832-5-H1-180-31
Image differs from product
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Overhung Load:||2,275||Input Keyway (C Face):||1/4 x 1/8|
|Series Style:||NH-HM-H1||Gear Type:||Worm|
|Output Shaft Assembly Code:||H1||Output shaft:||Hollow Bore|
|Output HP:||11.29||Center distance (inch):||3.25|
|Ratio Range:||5:1||Frame Size:||180|
|Input HP:||11.92||Input Diameter (in):||1.125 in|
|No. of Gear Reductions:||Single||Model Code:||HM832|
|Output RPM:||350||Shaft Seal Material:||Viton|
|Output Shaft Orientation:||H1||Output Torque:||2033|
|Housing material:||Cast Iron||Reducer:||Worm - Right Angle|
|Input Bore (C Face):||1.125||Assembly:||HM-H1|
|Input Style:||C-Face Coupled||Reducer Style:||Worm - Right Angle|
|Gear Drive Reductions:||Single||Product Type:||Right Angle|
|Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Input RPM:||1,750|
|Mounting Style:||Shaft Mount||Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers|
|Service Factor:||1||Output Hollow Shaft Diameter (in):||1.938 in|
|Output Key:||1/2 X 3.38||Bore Code:||31|