Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-HMQ832-30-H1-180-24
Image differs from product
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Output Style:||H1||Overhung Load:||2,275|
|Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Gear Drive Reductions:||Single|
|Bore Code:||24||Ratio Range:||30:1|
|Housing material:||Cast Iron||Output Key:||3/8 x 3.00|
|Service Factor:||1||Mounting Style:||Shaft Mount|
|Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Shaft Seal Material:||Viton|
|Output Torque:||3226||Gear Type:||Worm|
|Output HP:||2.986||Model Code:||HMQ832|
|Frame Size:||180||Series Style:||NH-HMQ-H1|
|Center distance (inch):||3.25||Output Shaft Assembly Code:||H1|
|Output Hollow Shaft Diameter (in):||1.500 in||Output RPM:||58|
|Output Shaft Orientation:||H1||Output shaft:||Hollow Bore|
|Ratio:||30:1||Reducer Style:||Worm - Right Angle|
|Input RPM:||1,750||Input Style:||C-face Quill|
|Input Diameter (in):||1.125 in||No. of Gear Reductions:||Single|
|Input Keyway (C Face):||1/4 x 1/8||Product Type:||Right Angle|
|Input Bore (C Face):||1.125||Reducer:||Worm - Right Angle|