Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-HM832-60-H1-180-31
Image differs from product
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Center distance (inch):||3.25||Input RPM:||1,750|
|Output Shaft Assembly Code:||H1||Output Shaft Orientation:||H1|
|Service Factor:||1||Input Keyway (C Face):||1/4 x 1/8|
|Gear Drive Reductions:||Single||Shaft Seal Material:||Viton|
|Output Hollow Shaft Diameter (in):||1.938 in||Input Bore (C Face):||1.125|
|No. of Gear Reductions:||Single||Overhung Load:||2,275|
|Output shaft:||Hollow Bore||Frame Size:||180|
|Input Style:||C-Face Coupled||Assembly:||HM-H1|
|Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Output RPM:||29|
|Reducer:||Worm - Right Angle||Input HP:||2.114|
|Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Model Code:||HM832|
|Input Diameter (in):||1.125 in||Ratio Range:||60:1|
|Reducer Style:||Worm - Right Angle||Series Style:||NH-HM-H1|
|Bore Code:||31||Output Torque:||3274|
|Mounting Style:||Shaft Mount||Output HP:||1.515|
|Product Type:||Right Angle||Output Key:||1/2 X 3.38|
|Gear Type:||Worm||Output Style:||H1|
|Ratio:||60:1||Housing material:||Cast Iron|