Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-HM832-50-H1-180-31
Image differs from product
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Frame Size:||180||Output Hollow Shaft Diameter (in):||1.938 in|
|Model Code:||HM832||Gear Drive Reductions:||Single|
|Shaft Seal Material:||Viton||Center distance (inch):||3.25|
|Input HP:||2.462||Output Key:||1/2 X 3.38|
|Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Output Shaft Assembly Code:||H1|
|No. of Gear Reductions:||Single||Bore Code:||31|
|Output Style:||H1||Output Shaft Orientation:||H1|
|Input Keyway (C Face):||1/4 x 1/8||Input Style:||C-Face Coupled|
|Input Diameter (in):||1.125 in||Mounting Style:||Shaft Mount|
|Reducer:||Worm - Right Angle||Input Bore (C Face):||1.125|
|Output Torque:||3315||Service Factor:||1|
|Gear Type:||Worm||Product Type:||Right Angle|
|Ratio:||50:1||Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers|
|Ratio Range:||50:1||Reducer Style:||Worm - Right Angle|
|Output HP:||1.841||Output RPM:||35|
|Output shaft:||Hollow Bore||Housing material:||Cast Iron|
|Input RPM:||1,750||Series Style:||NH-HM-H1|