Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-HM832-60-H1-140-19

Catalog #:NH-HM832-60-H1-140-19
Part #:NH8320524.19
  • Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
  • Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
  • Large oil capacity provides positive splash lubrication and superior cooling capability.
  • Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
  • O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
  • Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
  • The unique quill seal guard protects the input seal from damage during motor installation.
  • Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
  • All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
  • Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
You have no products selected for comparison. Please select at least two products to compare using the 'Add to Compare' checkbox found on product list pages or product detail pages.
Sorry, this item is no longer available.
Available warehouses not found.

General Specifications

UPC: 69031007765 Weight: 66.00 LB

Technical Specifications

Output RPM: 29 Output Torque: 3274
Shaft Seal Material: Viton Series Style: NH-HM-H1
Housing material: Cast Iron Bore Code: 19
HP Range: 2HP (< 3) Frame Size: 140
Series: NH Series - Ironman Narrow Housing Worm Gear Reducers Input Keyway (C Face): 3/16 x 3/32
Output Style: H1 Ratio: 60:1
Output Shaft Assembly Code: H1 Overhung Load: 2,275
Input Style: C-Face Coupled Product Type: Right Angle
Output Hollow Shaft Diameter (in): 1.188 in Ratio Range: 60:1
Center distance (inch): 3.25 Product Line: NH Series - Ironman Narrow Housing Worm Gear Reducers
Output Key: 1/4 X 2.5 Model Code: HM832
Gear Type: Worm Mounting Style: Shaft Mount
No. of Gear Reductions: Single Output Torque Range: 2500 to 5000 in lbs
Input Bore (C Face): 0.875 Output HP: 1.515
Input Diameter (in): 0.875 in Center Distance Range: 1" thru 3.25"
Gear Drive Reductions: Single Reducer Style: Worm - Right Angle
Output Shaft Orientation: H1 Input HP: 2.114
Output shaft: Hollow Bore Input RPM: 1,750
Service Factor: 1 Assembly: HM-H1
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.
You can order maximum {2} quantity for item {0}.
The following items have been added to your cart: {0}