Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-BMQ832-60-L-180
Image differs from product
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Center distance (inch):||3.25||Input Style:||C-face Quill|
|Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Assembly:||BMQ-L|
|Ratio:||60:1||Output Shaft Orientation:||L|
|Output Torque:||3274||Model Code:||BMQ832|
|Housing material:||Cast Iron||Input Keyway (C Face):||1/4 x 1/8|
|Output Diameter (in):||1.500 in||Input HP:||2.114|
|Mounting Style:||Base||Input RPM:||1,750|
|Input Bore (C Face):||1.125||Reducer Style:||Worm - Right Angle|
|Output Shaft Assembly Code:||L||Output HP:||1.515|
|Output Key:||3/8 x 2.25||Gear Type:||Worm|
|Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Gear Drive Reductions:||Single|
|Ratio Range:||60:1||Output Style:||L|
|Service Factor:||1||Frame Size:||180|
|Input Diameter (in):||1.125 in||Product Type:||Right Angle|
|Reducer:||Worm - Right Angle||No. of Gear Reductions:||Single|
|Overhung Load:||2,275||Output shaft:||Shaft|
|Shaft Seal Material:||Viton||Output RPM:||29|