Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-BM832-25-R-180
Image differs from product
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Overhung Load:||2,275|
|Ratio Range:||25:1||Input HP:||4.373|
|Center distance (inch):||3.25||Output Key:||3/8 x 2.25|
|Output Shaft Orientation:||R||Input Bore (C Face):||1.125|
|Reducer Style:||Worm - Right Angle||Output HP:||3.732|
|Shaft Seal Material:||Viton||Output RPM:||70|
|Frame Size:||180||Mounting Style:||Base|
|No. of Gear Reductions:||Single||Input Style:||C-Face Coupled|
|Gear Type:||Worm||Gear Drive Reductions:||Single|
|Assembly:||BM-R||Reducer:||Worm - Right Angle|
|Output shaft:||Shaft||Series Style:||NH-BM-R|
|Output Diameter (in):||1.500 in||Output Style:||R|
|Input Keyway (C Face):||1/4 x 1/8||Product Type:||Right Angle|
|Input RPM:||1,750||Housing material:||Cast Iron|
|Model Code:||BM832||Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers|
|Input Diameter (in):||1.125 in||Ratio:||25:1|
|Service Factor:||1||Output Torque:||3360|
|Output Shaft Assembly Code:||R|