Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-B832-50-L
Image differs from product
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Input Diameter (in):||0.875 in||Output Diameter (in):||1.500 in|
|Output Style:||L||Mounting Style:||Base|
|Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Input Keyway:||3/16 X 1.63|
|Input Style:||Shaft||No. of Gear Reductions:||Single|
|Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Assembly:||B-L|
|Gear Type:||Worm||Gear Drive Reductions:||Single|
|Housing material:||Cast Iron||Output shaft:||Shaft|
|Output Shaft Orientation:||L||Output Shaft Assembly Code:||L|
|Output Torque:||3315||Output Key:||3/8 x 2.25|
|Input RPM:||1,750||Ratio Range:||50:1|
|Reducer Style:||Worm - Right Angle||Service Factor:||1|
|Series Style:||NH-B-L||Output RPM:||35|
|Input HP:||2.462||Output HP:||1.841|
|Model Code:||B832||Reducer:||Worm - Right Angle|
|Ratio:||50:1||Shaft Seal Material:||Viton|
|Overhung Load:||2,170||Product Type:||Right Angle|
|Center distance (inch):||3.25|