Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-HMQ830-5-H1-180-31
Image differs from product
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Series Style:||NH-HMQ-H1||Reducer Style:||Worm - Right Angle|
|Ratio Range:||5:1||Output shaft:||Hollow Bore|
|Input RPM:||1,750||Overhung Load:||2,170|
|Input Diameter (in):||1.125 in||Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers|
|Output Torque:||1544||Mounting Style:||Shaft Mount|
|Center distance (inch):||3.00||Shaft Seal Material:||Viton|
|Output Shaft Orientation:||H1||Output Key:||1/2 X 3.38|
|Output Shaft Assembly Code:||H1||Reducer:||Worm - Right Angle|
|Input HP:||9.093||Housing material:||Cast Iron|
|Gear Drive Reductions:||Single||Input Bore (C Face):||1.125|
|Input Style:||C-face Quill||Output RPM:||350|
|Output HP:||8.573||Gear Type:||Worm|
|Output Hollow Shaft Diameter (in):||1.938 in||Frame Size:||180|
|No. of Gear Reductions:||Single||Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers|
|Model Code:||HMQ830||Bore Code:||31|
|Product Type:||Right Angle||Assembly:||HMQ-H1|
|Output Style:||H1||Input Keyway (C Face):||1/4 x 1/8|