Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-HMQ830-5-H1-180-28
Image differs from product
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Product Type:||Right Angle||Output HP:||8.573|
|Output Torque:||1544||Reducer:||Worm - Right Angle|
|Shaft Seal Material:||Viton||Frame Size:||180|
|Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Input Style:||C-face Quill|
|Input Keyway (C Face):||1/4 x 1/8||Center distance (inch):||3.00|
|No. of Gear Reductions:||Single||Service Factor:||1|
|Gear Drive Reductions:||Single||Input RPM:||1,750|
|Output shaft:||Hollow Bore||Mounting Style:||Shaft Mount|
|Output Hollow Shaft Diameter (in):||1.750 in||Model Code:||HMQ830|
|Gear Type:||Worm||Output RPM:||350|
|Input HP:||9.093||Housing material:||Cast Iron|
|Input Bore (C Face):||1.125||Output Shaft Orientation:||H1|
|Series Style:||NH-HMQ-H1||Output Shaft Assembly Code:||H1|
|Overhung Load:||2,170||Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers|
|Output Key:||3/8 x 3.00||Input Diameter (in):||1.125 in|
|Reducer Style:||Worm - Right Angle||Ratio:||5:1|
|Ratio Range:||5:1||Output Style:||H1|