Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-HM826-40-H1-56-19

Catalog #:NH-HM826-40-H1-56-19
Part #:NH8260520.19
  • Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
  • Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
  • Large oil capacity provides positive splash lubrication and superior cooling capability.
  • Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
  • O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
  • Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
  • The unique quill seal guard protects the input seal from damage during motor installation.
  • Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
  • All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
  • Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
You have no products selected for comparison. Please select at least two products to compare using the 'Add to Compare' checkbox found on product list pages or product detail pages.
Sorry, this item is no longer available.
Discontinued
Available warehouses not found.
Discontinued

General Specifications

UPC: 69031007043 Weight: 48 LB

Technical Specifications

Ratio: 40:1 Reducer Style: Worm - Right Angle
Output Style: H1 Shaft Seal Material: Viton
Input HP: 1.695 Frame Size: 56
Overhung Load: 1,625 Input Diameter (in): 0.625 in
Input RPM: 1,750 Assembly: HM-H1
Series: NH Series - Ironman Narrow Housing Worm Gear Reducers Bore Code: 19
Center distance (inch): 2.63 Service Factor: 1
Product Line: NH Series - Ironman Narrow Housing Worm Gear Reducers Output RPM: 43
Model Code: HM826 Output Torque: 1854
Output Shaft Orientation: H1 Input Style: C-Face Coupled
Input Keyway (C Face): 3/16 x 3/32 Output Torque Range: 1000 to 2500 in lbs
Mounting Style: Shaft Mount Output Shaft Assembly Code: H1
Housing material: Cast Iron Output shaft: Hollow Bore
HP Range: 1 to 1-1/2 (< 2) Output HP: 1.287
No. of Gear Reductions: Single Product Type: Right Angle
Center Distance Range: 1" thru 3.25" Ratio Range: 40:1
Output Hollow Shaft Diameter (in): 1.188 in Series Style: NH-HM-H1
Input Bore (C Face): 0.625 Gear Type: Worm
Output Key: 1/4 X 2.5 Gear Drive Reductions: Single
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.