Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-BMQ826-15-D-180

Catalog #:NH-BMQ826-15-D-180
Part #:NH8260244.00
  • Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
  • Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
  • Large oil capacity provides positive splash lubrication and superior cooling capability.
  • Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
  • O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
  • Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
  • The unique quill seal guard protects the input seal from damage during motor installation.
  • Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
  • All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
  • Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
You have no products selected for comparison. Please select at least two products to compare using the 'Add to Compare' checkbox found on product list pages or product detail pages.
Sorry, this item is no longer available.
Available warehouses not found.
Weight:48 LB
List Price: $1,149.00

General Specifications

UPC: 69031007000 Weight: 48 LB

Technical Specifications

Center distance (inch): 2.63 Service Factor: 1
Input Style: C-face Quill Reducer: Worm - Right Angle
Output Diameter (in): 1.125 in Input Keyway (C Face): 1/4 x 1/8
Input Diameter (in): 1.125 in Overhung Load: 1,625
Housing material: Cast Iron Gear Drive Reductions: Single
No. of Gear Reductions: Single Output Style: D
Output Torque: 1737 Output Key: 1/4 x 1.75
Shaft Seal Material: Viton Model Code: BMQ826
Input RPM: 1,750 Output shaft: Shaft
Mounting Style: Base Input Bore (C Face): 1.125
Ratio: 15:1 Output Shaft Assembly Code: D
Gear Type: Worm Output HP: 3.216
Product Type: Right Angle Frame Size: 180
Series: NH Series - Ironman Narrow Housing Worm Gear Reducers Series Style: NH-BMQ-D
Input HP: 3.614 Product Line: NH Series - Ironman Narrow Housing Worm Gear Reducers
Output RPM: 116 Output Shaft Orientation: D
Ratio Range: 15:1 Reducer Style: Worm - Right Angle
Assembly: BMQ-D
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.