Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-BMQ826-7.5-L-180
Image differs from product
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Output RPM:||233.3||Product Type:||Right Angle|
|Reducer:||Worm - Right Angle||Assembly:||BMQ-L|
|Input Bore (C Face):||1.125||Output Shaft Assembly Code:||L|
|Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Input Diameter (in):||1.125 in|
|Service Factor:||1||Gear Type:||Worm|
|Output Shaft Orientation:||L||Series Style:||NH-BMQ-L|
|Overhung Load:||1,625||Input HP:||4.956|
|No. of Gear Reductions:||Single||Ratio Range:||7.5:1|
|Output HP:||4.571||Output Key:||1/4 x 1.75|
|Input RPM:||1,750||Output shaft:||Shaft|
|Center distance (inch):||2.63||Model Code:||BMQ826|
|Output Torque:||1235||Housing material:||Cast Iron|
|Gear Drive Reductions:||Single||Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers|
|Ratio:||7.5:1||Input Style:||C-face Quill|
|Input Keyway (C Face):||1/4 x 1/8||Reducer Style:||Worm - Right Angle|
|Frame Size:||180||Shaft Seal Material:||Viton|
|Mounting Style:||Base||Output Style:||L|
|Output Diameter (in):||1.125 in|