Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-HMQ824-15-H1-140-20
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Reducer Style:||Worm - Right Angle||Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers|
|Product Type:||Right Angle||Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers|
|Series Style:||NH-HMQ-H1||Model Code:||HMQ824|
|Gear Type:||Worm||Center distance (inch):||2.38|
|Reducer:||Worm - Right Angle||Ratio:||15:1|
|Service Factor:||1||Output Torque:||1318|
|Output Key:||1/4 X 2.50||Output RPM:||116|
|Output Shaft Assembly Code:||H1||Input Bore (C Face):||0.875|
|Output Hollow Shaft Diameter (in):||1.250 in||Input RPM:||1,750|
|Shaft Seal Material:||Viton||Mounting Style:||Shaft Mount|
|Output Style:||H1||Gear Drive Reductions:||Single|
|Input Diameter (in):||0.875 in||Output Shaft Orientation:||H1|
|Output HP:||2.439||Bore Code:||20|
|Input HP:||2.765||Input Style:||C-face Quill|
|No. of Gear Reductions:||Single||Output shaft:||Hollow Bore|
|Housing material:||Cast Iron||Input Keyway (C Face):||3/16 x 3/32|