Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-HMQ824-15-H1-140-18

Catalog #:NH-HMQ824-15-H1-140-18
Part #:NH8240564.18
  • Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
  • Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
  • Large oil capacity provides positive splash lubrication and superior cooling capability.
  • Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
  • O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
  • Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
  • The unique quill seal guard protects the input seal from damage during motor installation.
  • Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
  • All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
  • Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
You have no products selected for comparison. Please select at least two products to compare using the 'Add to Compare' checkbox found on product list pages or product detail pages.
Sorry, this item is no longer available.
Discontinued
Available warehouses not found.
The item requires a minimum order of {0} pieces.
The item must be ordered in multiplies of {0} pieces.
Discontinued

General Specifications

UPC: 69031006755 Weight: 40.00 LB

Technical Specifications

Model Code: HMQ824 Frame Size: 140
Input HP: 2.765 Output Hollow Shaft Diameter (in): 1.125 in
Reducer Style: Worm - Right Angle Center distance (inch): 2.38
Output Style: H1 Mounting Style: Shaft Mount
Input Style: C-face Quill Service Factor: 1
Output Torque: 1318 Series: NH Series - Ironman Narrow Housing Worm Gear Reducers
Center Distance Range: 1" thru 3.25" Ratio: 15:1
Output RPM: 116 Input Diameter (in): 0.875 in
Output Shaft Assembly Code: H1 Assembly: HMQ-H1
Input RPM: 1,750 HP Range: 2HP (< 3)
Output Torque Range: 1000 to 2500 in lbs Product Type: Right Angle
Product Line: NH Series - Ironman Narrow Housing Worm Gear Reducers Bore Code: 18
Housing material: Cast Iron Output Shaft Orientation: H1
Input Keyway (C Face): 3/16 x 3/32 Output Key: 1/4 x 3.00
No. of Gear Reductions: Single Gear Drive Reductions: Single
Gear Type: Worm Output shaft: Hollow Bore
Series Style: NH-HMQ-H1 Overhung Load: 1,770
Output HP: 2.439 Ratio Range: 15:1
Shaft Seal Material: Viton Input Bore (C Face): 0.875
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
New password and confirm password do not match.
The password entered does not comply with our password policy. Please try again.
The password entered does not comply with our password policy. Please try again.
You have already access to enetered account.
Account already added
Please select an account
The entered account number is not valid.
You must provide a valid account number to be added. Please contact your Sales Representative or Account Administrator if you don’t know your Account Number.
Please select Additonal Access checkbox.
Please enter your address.
Please enter your address cont.
Please check to agree with Terms of Use and Privacy Policy.
Please enter your city.
Please enter your company name.
Please enter confirm password.
Please select your country.
Please enter a valid format for your email address.
Please enter your email address.
Please enter your first name.
Please enter your job title.
Please enter your last name.
The current password entered does not match your password or new password is the same like one of the previous or password changed last 30 days.
Profile updated successfully.
Error while request access.
Registration Information has been received.   Thank you for your interest in Regal.
Please enter new password.
Please enter old password.
Please enter a valid format for your phone number.
Please enter your phone number.
Please enter a valid format for your extension.
Please select at least one product category.
Please verify you are not a robot.
Registration Information has been received.   Thank you for your interest in Regal.
You must provide the name of a Regal Beloit employee who can confirm your need for access to Genteq technical documents.
Please select your state.
This email is already in use. Please log in.
Please enter your zip code.
Your session has timed out. You must log in again to access secure content. Any work on the current page will be lost.
You can order maximum {2} quantity for item {0}.
The following items have been added to your cart: {0}