Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-H824-30-H1-23
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Mounting Style:||Shaft Mount||Reducer:||Worm - Right Angle|
|Output HP:||1.317||Gear Type:||Worm|
|No. of Gear Reductions:||Single||Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers|
|Output shaft:||Hollow Bore||Assembly:||H-H1|
|Input Diameter (in):||0.75 in||Gear Drive Reductions:||Single|
|Ratio Range:||30:1||Service Factor:||1|
|Output Shaft Assembly Code:||H1||Output Shaft Orientation:||H1|
|Center distance (inch):||2.38||Output RPM:||58|
|Input HP:||1.653||Reducer Style:||Worm - Right Angle|
|Output Torque:||1423||Output Style:||H1|
|Shaft Seal Material:||Viton||Product Type:||Right Angle|
|Input RPM:||1,750||Input Style:||Shaft|
|Housing material:||Cast Iron||Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers|
|Series Style:||NH-H-H1||Input Keyway:||3/16 x 1.63|
|Output Key:||3/8 x 3.00||Output Hollow Shaft Diameter (in):||1.438 in|
|Bore Code:||23||Model Code:||H824|