Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-BMQ824-10-D-180
Image differs from product
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Ratio:||10:1||Reducer:||Worm - Right Angle|
|Output shaft:||Shaft||Output Diameter (in):||1.000 in|
|Input Keyway (C Face):||1/4 x 1/8||No. of Gear Reductions:||Single|
|Reducer Style:||Worm - Right Angle||Output HP:||3.253|
|Input Style:||C-face Quill||Output RPM:||175|
|Shaft Seal Material:||Viton||Mounting Style:||Base|
|Gear Drive Reductions:||Single||Ratio Range:||10:1|
|Overhung Load:||1,770||Frame Size:||180|
|Output Torque:||1172||Input Diameter (in):||1.125 in|
|Input HP:||3.564||Model Code:||BMQ824|
|Product Type:||Right Angle||Output Key:||1/4 x 1.75|
|Output Shaft Orientation:||D||Output Shaft Assembly Code:||D|
|Gear Type:||Worm||Series Style:||NH-BMQ-D|
|Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Service Factor:||1|
|Input Bore (C Face):||1.125||Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers|
|Assembly:||BMQ-D||Center distance (inch):||2.38|
|Housing material:||Cast Iron||Input RPM:||1,750|