Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-BMQ824-40-R-140

Catalog #:NH-BMQ824-40-R-140
Part #:NH8240200.00
  • Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
  • Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
  • Large oil capacity provides positive splash lubrication and superior cooling capability.
  • Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
  • O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
  • Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
  • The unique quill seal guard protects the input seal from damage during motor installation.
  • Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
  • All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
  • Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
You have no products selected for comparison. Please select at least two products to compare using the 'Add to Compare' checkbox found on product list pages or product detail pages.
Sorry, this item is no longer available.
Available warehouses not found.
Weight:38.00 LB
List Price: $935.00

General Specifications

UPC: 69031006610 Weight: 38.00 LB

Technical Specifications

Reducer Style: Worm - Right Angle Input RPM: 1,750
Product Line: NH Series - Ironman Narrow Housing Worm Gear Reducers Output RPM: 43
Shaft Seal Material: Viton No. of Gear Reductions: Single
Input Bore (C Face): 0.875 Assembly: BMQ-R
Series Style: NH-BMQ-R Housing material: Cast Iron
Output Shaft Assembly Code: R Input Diameter (in): 0.875 in
Reducer: Worm - Right Angle Ratio Range: 40:1
Ratio: 40:1 Product Type: Right Angle
Series: NH Series - Ironman Narrow Housing Worm Gear Reducers Output shaft: Shaft
Gear Drive Reductions: Single Output Shaft Orientation: R
Output HP: 0.994 Mounting Style: Base
Output Diameter (in): 1.000 in Service Factor: 1
Output Style: R Gear Type: Worm
Input HP: 1.342 Center distance (inch): 2.38
Output Torque: 1433 Model Code: BMQ824
Input Keyway (C Face): 3/16 x 3/32 Overhung Load: 1,770
Frame Size: 140 Output Key: 1/4 x 1.75
Input Style: C-face Quill
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.