Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-BMQ824-10-L-140
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Input Style:||C-face Quill||Input RPM:||1,750|
|Input HP:||3.564||Product Type:||Right Angle|
|Output HP:||3.253||Output Diameter (in):||1.000 in|
|Gear Type:||Worm||Service Factor:||1|
|Reducer:||Worm - Right Angle||Output RPM:||175|
|Mounting Style:||Base||No. of Gear Reductions:||Single|
|Ratio:||10:1||Output Shaft Assembly Code:||L|
|Output Style:||L||Input Keyway (C Face):||3/16 x 3/32|
|Output Torque:||1172||Housing material:||Cast Iron|
|Input Bore (C Face):||0.875||Center distance (inch):||2.38|
|Overhung Load:||1,770||Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers|
|Input Diameter (in):||0.875 in||Output shaft:||Shaft|
|Frame Size:||140||Ratio Range:||10:1|
|Output Shaft Orientation:||L||Shaft Seal Material:||Viton|
|Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Reducer Style:||Worm - Right Angle|
|Output Key:||1/4 x 1.75||Model Code:||BMQ824|
|Gear Drive Reductions:||Single|