Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-HMQ821-5-H1-140-23
Image differs from product
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Reducer Style:||Worm - Right Angle||Output RPM:||350|
|Reducer:||Worm - Right Angle||Frame Size:||140|
|Output Shaft Orientation:||H1||Output Torque:||614|
|Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Ratio:||5:1|
|Output Key:||3/8 x 3.00||Input Style:||C-face Quill|
|Keyway:||3/16 X 3/32||Input HP:||3.653|
|Output HP:||3.41||Input Bore (C Face):||0.875|
|Output Hollow Shaft Diameter (in):||1.438 in||Input Quill Diameter (in):||0.875 in|
|Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Model Code:||HMQ821|
|Gear Drive Reductions:||Single||Input Diameter (in):||0.875 in|
|Bore Code:||23||Service Factor:||1|
|Product Type:||Right Angle||Gear Type:||Worm|
|Output Shaft Assembly Code:||H1||Mounting Style:||Shaft Mount|
|Ratio Range:||5:1||Input Keyway (C Face):||3/16 x 3/32|
|Housing material:||Cast Iron||No. of Gear Reductions:||Single|
|Shaft Seal Material:||Viton||Output Style:||H1|
|Center distance (inch):||2.06||Series Style:||NH-HMQ-H1|
|Output shaft:||Hollow Bore|