Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-HMQ821-7.5-H1-56-19

Catalog #:NH-HMQ821-7.5-H1-56-19
Part #:NH8210538.19
  • Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
  • Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
  • Large oil capacity provides positive splash lubrication and superior cooling capability.
  • Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
  • O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
  • Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
  • The unique quill seal guard protects the input seal from damage during motor installation.
  • Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
  • All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
  • Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
You have no products selected for comparison. Please select at least two products to compare using the 'Add to Compare' checkbox found on product list pages or product detail pages.
Sorry, this item is no longer available.
Discontinued
Available warehouses not found.
Discontinued

General Specifications

UPC: 69031006370 Weight: 26 LB

Technical Specifications

Output HP: 2.562 Input Style: C-face Quill
Output Torque: 692 Input Bore (C Face): 0.625
Mounting Style: Shaft Mount Output Style: H1
HP Range: 2HP (< 3) Gear Drive Reductions: Single
Shaft Seal Material: Viton Assembly: HMQ-H1
Output Shaft Assembly Code: H1 Product Type: Right Angle
Frame Size: 56 Service Factor: 1
Output Torque Range: 500 to 1000 in lbs Series Style: NH-HMQ-H1
Overhung Load: 1,035 Input RPM: 1,750
Gear Type: Worm Input Keyway (C Face): 3/16 x 3/32
Bore Code: 19 Input Diameter (in): 0.625 in
Center Distance Range: 1" thru 3.25" Product Line: NH Series - Ironman Narrow Housing Worm Gear Reducers
Housing material: Cast Iron Series: NH Series - Ironman Narrow Housing Worm Gear Reducers
Center distance (inch): 2.06 Output Shaft Orientation: H1
Output shaft: Hollow Bore Output Key: 1/4 X 2.5
No. of Gear Reductions: Single Ratio Range: 7.5:1
Output RPM: 233 Reducer Style: Worm - Right Angle
Output Hollow Shaft Diameter (in): 1.188 in Ratio: 7.5:1
Input HP: 2.793 Model Code: HMQ821
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.