Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-BMQ821-40-R-140
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Center distance (inch):||2.06||Output Diameter (in):||0.875 in|
|Output Style:||R||Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers|
|Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Model Code:||BMQ821|
|Reducer Style:||Worm - Right Angle||Mounting Style:||Base|
|Input HP:||0.916||Product Type:||Right Angle|
|Shaft Seal Material:||Viton||Output Shaft Orientation:||R|
|Output Torque:||971||Output shaft:||Shaft|
|Service Factor:||1||Frame Size:||140|
|Input Style:||C-face Quill||Input Bore (C Face):||0.875|
|Gear Type:||Worm||Overhung Load:||1,315|
|Input Keyway (C Face):||3/16 x 3/32||Output RPM:||43|
|No. of Gear Reductions:||Single||Output HP:||0.674|
|Reducer:||Worm - Right Angle||Series Style:||NH-BMQ-R|
|Assembly:||BMQ-R||Housing material:||Cast Iron|
|Ratio:||40:1||Output Shaft Assembly Code:||R|
|Input Diameter (in):||0.875 in||Output Key:||3/16 X 1.50|
|Gear Drive Reductions:||Single||Ratio Range:||40:1|