Grove Gear Cast Iron Single-Reduction Worm Reducer - NH-BMQ821-15-R-140
- Rugged cast iron housings, covers, and flanges provide superior strength and rigidity.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles. Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
|Reducer Style:||Worm - Right Angle||Product Type:||Right Angle|
|Product Line:||NH Series - Ironman Narrow Housing Worm Gear Reducers||Series:||NH Series - Ironman Narrow Housing Worm Gear Reducers|
|Series Style:||NH-BMQ-R||Model Code:||BMQ821|
|Gear Type:||Worm||Center distance (inch):||2.06|
|Reducer:||Worm - Right Angle||Ratio:||15:1|
|Output Shaft Assembly Code:||R||Input HP:||1.887|
|Ratio Range:||15:1||Output HP:||1.661|
|Frame Size:||140||Output Style:||R|
|Housing material:||Cast Iron||Output Shaft Orientation:||R|
|Input Keyway (C Face):||3/16 x 3/32||Gear Drive Reductions:||Single|
|No. of Gear Reductions:||Single||Output Diameter (in):||0.875 in|
|Output Key:||3/16 X 1.50||Service Factor:||1|
|Shaft Seal Material:||Viton||Input Bore (C Face):||0.875|
|Input Style:||C-face Quill||Input Diameter (in):||0.875 in|
|Mounting Style:||Base||Output shaft:||Shaft|
|Output Torque:||897||Input RPM:||1,750|